PaxScan 4343R Flat Panel Detector
The PaxScan 4343R is our largest X-ray imaging flat panel detector designed for general digital radiographic imaging. Based upon the new Gigabit Ethernet interface, images are displayed on a usersupplied workstation.
®PaxScan is a Registered Trademark of Varex Imaging Corporation
| Item | |
|---|---|
| Technical Specifications | |
| Receptor Type | Amorphous Silicon with Charge Well Pixel™ Technology |
| Conversion Screen | Direct Deposit CsI, Detached CsI, DRZ Plus |
| Pixel Area | Total ……….42.7 (h) x 42.7 (v) cm (16.8 x 16.8 inch)
Active . . . . 42.4 (h) x 42.4 (v) cm (16.7 x 16.7 inch) |
| Pixel Matrix | Total . . . . . . . . . . . . . . . . . . . . . . . 3,072 (h) x 3,072 (v)
Active . . . . . . . . . . . . . . . . . . . . . 3,052 (h) x 3,052 (v) |
| Pixel Pitch | 139 μm |
| Limiting Resolution | 3.6 lp/mm |
| DQE (0) (RQA5) | 70% ±5% |
| Energy Range Standard | 40 – 150 kVp |
| Fill Factor | 100% |
| Scan Method | Progressive |
| Data Output | Gigabit Ethernet |
| A/D Conversion | 14-bits |
| A/D Conversion | 14-bits |
| Cycle Time (minimum / standard) | 6 / 8 sec. |
| Exposure Control | Inputs: Prepare, Expose-Request Outputs: Expose-OK |
| Computer Requirements | |
| RAM | 2.00 GB |
| CPU | Pentium dual core running @ 2.0 GHz or equivalent |
| Software | |
| The software release includes ViVA™, a basic application for image acquisition and viewing on an end-user workstation or laptop running Microsoft® Windows™. The developer’s software package includes a “Virtual Command Processor” software interface that performs detector calibration, detector set-up, image acquisition, and image corrections. ViVA™ includes file type translators for .viv, .raw, .jpg, and .bmp file formats. Windows® XP and Windows ® 7 (32 bit) compatible. | |
| Environmental | |
| Shock | High-shock tolerance |
| Temperature Range | – Operating (at back cover) 10°C to 35°C (max.) (Ambient) – Storage . . . . . . . . . . . . . . . . . . . . . -20°C to +70°C |
| Humidity | Operating and Storage (non- condensing) . . . . . . . . . . . . . . . . 10 to 90% |
| Atmospheric Pressure | Operating and Storage . . . . . . . . . . . . . . 70 kPa to 106 kPa |
| Weight Limit | |
| Uniform load across entire carbon fiber surface | 150 kg |
| Concentrated 40mmdiameter load at the center | 100 kg |
| Regulatory | |
| U.S. | ANSI/AAMI ES60601-1:2005 |
| Canada | CAN/CSA 22.2 No. 60601-1:08 |
| Mechanical | |
| Weight | 16.5 lbs. (7.5 kg) |
| Housing Material | Aluminum |
| Sensor Protection Material | Carbon fiber plate and aluminum |
| Power | |
| Power Dissipation | 40 watts (cont.) 42 watts (max.) |
| I/O Interface Box | 90-240 VAC, 47-63 Hz |
Varex PaxScan 4343R
Quote Request
