fbpx

LARGEST NATIONWIDE SERVICE & SUPPORT NETWORK IN THE U.S.

Contact Us Today

Contact Us Today
Toll-FREE

Diagnostic Precision with DICOM Part 14 Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tones on the production line to produce a monitor compliant with DICOM Part 14.

Consistency with DICOM Part 14 Calibration
When the self-diagnosis function, utilized with bundled RadiCS LE quality control software, detects a change in luminance, a warning icon appears on the desktop taskbar enabling prompt correction. Furthermore, the self-calibration function (patent pending), a simplified calibration compliant with the DICOM Part 14 standard, can periodically be performed to correct the grayscale tones and brightness of the monitor.

10-Bit Simultaneous Grayscale Display

  • 10-bit (1,024 tones) from a 13-bit look-up table (8,161 tones) can be displayed simultaneously for high-definition medical imaging.
  • 10-bit graphics board and 10-bit viewer software needed for 10-bit display.

Brightness Uniformity for a Steadier Image Across the Screen

  • The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors.

Mode Selection for Optimum Viewing

  • Selectable with the front panel buttons, the CAL Switch function allows for various imaging modes of different modalities such as CR, CT, and endoscope images. Furthermore, auto mode settings can be made with the Auto CAL Switch function.

Quick Brightness Stabilization for Instant Viewing
At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and compensates for brightness fluctuations caused by the ambient temperature and the passage of time.

Wide Viewing Angles

  • Wide Viewing angles with minimal color shift when viewed from the side.

Backlight Saver with Screen Saver
With ScreenManager Pro for Medical utility software installed, the Backlight Saver function turns off the monitor’s backlight when the screen saver is activated, and turns it on again when the computer comes out of screen saver mode. This function helps to reduce power consumption when the monitor is used for a prolonged period of time.

Backlight Saver with Viewer Application
By setting the Backlight Saver function to operate with viewer application, the monitor’s backlight is on while the viewer is being used and the backlight is off while the viewer is not being used.

Ergonomic Design for Improved Operability and Less Fatigue
Narrow bezels require less eye movement in a multi-panel environment. The height and pivot adjustable stand offers added flexibility and viewing comfort.

Pairing Monitors
EIZO offers the same color and grayscale for two monitors bundled as a pair in one box.

Brightness Stability Within Usage Time Guaranteed
EIZO’s confidence in its product quality extends to brightness stability which is also covered during the usage time specified in the warranty.

Customer Assurance with Medical Standards
Meets the strictest medical, safety, and EMC emission standards.

ISO 13485 Certification
Acquiring ISO 13485 certification demonstrates EIZO’s ability to consistently meet customer requirements for our products and services.

Warranty with Safety and Trust
EIZO and its authorized distributors offer a five-year limited warranty.

Screen technology…..54 cm (21.3″) TFT Monochrome LCD Panel (IPS)
Active screen size (diagonal)…..541 mm diagonal
Active screen size (H x V)…..324.0 x 432.0 mm
Resolution…..1200 x 1600 (3:4 aspect ratio)
Pixel pitch…..0.270 x 0.270 mm
Display Type…..Monochrome
Grayscale Display…..1,024 from a palette of 8,161 tones
Viewing angle…..170°, 170°
Contrast ratio…..850:1
Response time…..23 ms (On/Off)
Sensor…..Backlight Sensor
Scanning frequency (H;V)…..31 – 100 kHz, 48 – 71.5 Hz (VGA Text: 69 – 71 Hz) Frame synchronous mode: 59 – 61 Hz
Sync formats   ……
Housing color…..Black
Video input signals…..DVI-D x 1
USB ports……1 upstream, 2 downstream
USB standard…..USB 2.0
Output terminals  …..
Power Requirements…..AC 100 – 120 V, 200 – 240 V: 50 / 60 Hz
Power Consumption / Save Mode 100 W / Less than 3 W
Power management…..DVI DMPM
Dot clock…..No
OSD languages…..English, French, German, Italian, Japanese, Simplified Chinese, Spanish, Swedish, Traditional Chinese
Dimensions w/o stand (W x H x D) …..
Weight…..with stand 9.9 kg
without stand 6.9 kg
Mounting standard…..VESA standard 100 x 100 mm
Certifications…..CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, IEC60601-1, VCCI-B, FCC-B, Canadian ICES-003-B, C-tick, RoHS, CCC, GOST-R
Supplied accessories…..AC power cord, signal cable (DVI-D – DVI-D), USB cable, Utility Disk (RadiCS LE, ScreenManager Pro for Medical), user’s manual, warranty card
Optional accessories…..Warranty: Five Years

RadiForce GS220

Quote Request

Scroll to Top