With high luminance and high contrast, and an integrated color calibration function, our CCL254i2 delivers highly accurate color reproduction faithful to the DICOM GSDF. The CCL254i2 includes a luminance compensation feature for edge to edge consistency, is fully configurable for multi-display applications, and comes standard with hardware-based pivot functionality for fast image drawing in portrait orientation.
New luminance stabilizing system λ-Sentinel II
λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.
In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.
Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.
- An optional PM Medivisor software is required.
Luminance equalizer λ-Uniformity Congruence
Is built in to achieve highly accurate luminance uniformity across the screen. Luminance unevenness is minimized in the final tune-up prior to shipping.
- Images shown are for illustrative purposes only.
High luminance, high quality LCD panel
950 cd/m² and contrast ratio of 900:1. Due to its wide, dynamic range, high quality grayscale can also be achieved on this color display, providing versatility for multi-modality workstations.
Accurate color and grayscale reproduction compliant with DICOM Part 14
By calibrating color temperature, luminance, and gamma characteristics, reproduction of colors faithful to the original and smooth display of grayscale are possible.
Built-in 16-bit LUT (look up table) for accurate grayscale reproduction
The built-in LUT selects the most appropriate 256 shades of gray (8bit) out of 16bit shades to realize finer and smoother grayscale.
Hardware pivot function for fast drawing in portrait on landscape orientation
Stress-free operation is made possible by fast drawing speed for on-the-fly change to portrait.
OSD Information Display
Such information as the display model, total operating time, actual measurement of luminance, and calibration settings can be checked on screen.
LED indicator to inform of current status
A glance at the LED indicator tells you the display’s current operating status.
Enhanced convenience with utility software
Advanced power saving
The backlight dims as the screensaver starts, reducing power consumption and preventing unnecessary deterioration of the backlight.
- This feature may not be available, depending on the specifications of the graphics card used.
Gamma check
18 points of luminance values are measured and plotted into a graph.
Ambient light and display luminance measurement
The built-in sensors measure display luminance and ambient illuminance.
Warranty
Standard 5 years
Screen technology —– 21.3-inch, Color, TFT active matrix
Display area —– 432mm x 324mm
Pixel pitch —– 0.270mm x 0.270mm
Contrast ratio —– 900:1 (typ)
Maximum luminance —– 950cd/m² (typ), (factory-set to 410cd/m² and 300cd/m²)
Viewing angle —– 170° horizontal and vertical (typ)
Resolution —– 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA) Color Display Full color (16.77 million colors)
Display Type —– Color Display: Full color (16.77 million colors)
Video input signals —– DVI 1.0 compliant
Power Requirements —– Input: AC Adapter 100V-240V (±10%) 50/60Hz
Maximum Power Consumption: 120W (typ), (with power management feature)
Calibration —– control Luminance, Gamma, Color temp., Capability to save 3 sets of LUT settings (A n optional calibration kit is required.)
OSD information display —– Model name, Serial No., Total operating time, Calibration settings (Operating time since the last calibration, Luminance, Gamma, Color temp., etc.), Current luminance, etc.
USB Hub —– USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2)
Standards —– UL60601-1, CSA C22.2 No. 601.1, FDA510(k), FCC-B, VCCI-B
Dimensions —– Landscape: 474mm x 468.4/529.9mm x 220mm
Portrait: 367mm x 521.9/583.4mm x 220mm
Weight —– Approx. 11.5kg (Approx. 7.3kg without tilt stand)
Tilt Stand —– Tilt, swivel, landscape/portrait rotation
Mounting standard —– 100mm VESA compliant
Security slot —– On the back of the panel and the tilt stand
Supplied accessories —– AC adapter, 3P power cord, DVI cable, USB cable, User manual
PROTECTIVE FILTER
Antireflection-coated
OTHER FEATURES
Features Luminance Uniformity Correction, Hardware pivot, LED indicator
