The ME355i2 is a 3MP grayscale display and is widely used by radiologists due to its versatility for multi-modality workstations. The ME355i2 includes luminance uniformity compensation for edge to edge uniformity and is capable of displaying 2048 shades of gray, simultaneously. It also comes standard with a hardware based pivot function for fast image rendering in portrait or landscape orientation.
New luminance stabilizing system λ-Sentinel II
λ-Sentinel II consists of a luminance sensor and luminance control circuit. The luminance sensor, integrated into the front bezel, consistently monitors and accurately stabilizes luminance on the screen by rapidly communicating with the backlight sensor.
In addition, a build-in luminance sensor provided with i2 models enables even simpler calibration without attaching the calibration sensor.
Remote grayscale check and remote calibration functions
Conformance testing to DICOM GSDF and calibration can be remotely accomplished. These features minimize the burden on display administrators.
- Optional PM Medivisor software is required.
- Viewer software that supports Totoku’s multi-shade display system is required for 11-bit grayscale viewing
- Images shown are for illustrative purposes only.
- Optional calibration kit is required.
- This feature may not be available, depending on the specifications of the graphics card used.
Screen technology —– 20.8-inch, Monochrome, TFT active matrix
Display area —– 423.9mm x 318.0mm
Pixel pitch —– 0.207mm x 0.207mm
Contrast ratio —– 900:1 (typ)
Maximum luminance —– 1000cd/m² (typ), (calibrated to 410cd/m² by factory default)
Viewing angle —– 70° horizontal and vertical (typ)
Resolution —– USTEXT, 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 2048 x 1536 (QXGA)
Display Type —– Grayscale Display: 11.9bit (3826 shades of gray) to 256 shades of gray Along with the customized viewer, simultaneous display of 11bit (2048 shades of gray) is possible.
Video input signals —– DVI 1.0 compliant
Power Requirements —– Input: AC Adapter 100V-240V (±10%) 50/60Hz
Max. Power Consumption: 85W (typ), (with power management feature)
Calibration control —– Luminance, Gamma, Capability of saving 3 sets of LUT settings (An optional calibration kit is required.)
OSD information display —– Model name, Serial No., Total operating time, Calibration settings (Operating time from Last Calibration, Luminance, Gamma, etc.), Current luminance, etc.
USB Hub —– USB Rev. 2.0 compliant, Self-powered USB upstream connector (x1), USB downstream connector (x2)
Standards —– UL60601-1, CSA C22.2 No. 601.1, MDD/CE, FDA510(k), FCC-B, VCCI-B, CCC, MIC
Dimensions —– Landscape: 474mm x 468.4/529.9mm x 220mm
Portrait: 367mm x 521.9/583.4mm x 220mm
Weight —– Approx. 11kg (Approx. 6.8kg without tilt stand)
Tilt Stand —– Tilt, Swivel, Portrait / Landscape rotation
Mounting standard —– 100mm VESA compliant
Security slot —– On the back of the panel and the tilt stand
Supplied accessories —– AC adapter, Power cord (3P), DVI cable, USB cable, User manual
PROTECTIVE FILTER
Antireflection-coated
OTHER FEATURES
Luminance Uniformity Correction Function, Hardware Pivot function, Color/Monochrome conversion function, LED indicator
